- Popis
- Možnosti
- Specifikace
Popis
- patentovaný de facto průmyslový standard pro hands-on analýzu mobilních zařízení
- poskytuje maximální izolaci pro signály mobilních sítí, WiFi i GPS
- vybavena novým GEN-2 RF systémem těsnění
- vybavena nejnovější GEN-2 RF absorbční a odraznou pěnou
- velké RF stíněný průzor pro přímý pohled na displej zařízení
- dvě RF stíněné dotykové rukavice se stříbrnou mřížkou pro manipulaci se zařízením a ovládání dotykového displeje zařízení
- zabudované osvětlení
- zabudované odstíněné napájení 110 V
- odstíněné USB 2.0 rozhraní
- vysoce kavlitní a odolný materiál a petlice pro visací zámek zabraňují neoprávněné manipulaci se zařízením a umožňují zachování chain of custody
- na přání možno vybavit řadou filtrovaných I/O konektorů
For nearly two decades, the patented Ramsey Electronics® STE3000 series RF Test Enclosure has been the wireless industry standard for a benchtop RF test chamber that provide both visual and hands-access to the device under test. As the term “cellular forensics” entered all of our vocabulary, it was natural that we also became the standard for that industry.
The STE3000F2 was designed to give the forensics technician the equivalent of a highly isolated screen room right on his bench to perform electronic device interrogations. The term “cell phone” has long been replaced with “smartphone” and with that, hands-on access and control of the device became essential. The smart phone is now a communications command console that incorporates email, text and SMS messages, document storage, picture, image, and media storage, notepad, journal, and a host of other functions and services. And each of those services has a history that is critical to access during a device interrogation.
Once the device is inside the STE3000F2, you can view it through the LED illuminated RF tight window. You then have hands-on access to the device through our silver mesh RF tight gloves. Whether you need to open a device, swipe it, turn it on, touch screen icons, change pages… whatever you need to do, you can do, just as though the phone was in your own hands. After all, it is! This also allows you to connect power, chargers, and USB data communications to the device for connection to your interrogation hardware and software… all while the device is maintaining isolation from the carrier’s network regardless of the carrier or the frequency bands in use by them. The device is also fully isolated from WiFi signal sources, including both 2.4 GHz and 5.0 GHz and therefore covering any combination of 802.11a/b/g/n/ac protocols. Just like our other forensics RF Test Enclosures, once secured from outside signals, the device is protected from remote kill commands, remote lock commands, remote self-destruct commands, as well as being protected from GPS and location tracking.
Once the device is transferred from the field to the STE3000F2, it can be charged with a standard 110VAC device charger using the built in RF filtered AC power strip. This can be particularly useful to maintain device power to eliminate the threat of a power-down lockout or self-destruct script being executed. As mentioned above, with hands-on access and real-time viewing, you can easily plug the device into an RF filtered USB interface to access it with your interrogation software. The STE3000F2 comes standard with our STEUSB2071 USB2.0 High Speed Interface, giving you full speed access to the device while maintain full RF isolation from the outside world.
The RF filtered AC power interface as well as the USB2.0 interface are located on the spacious universal removable I/O panel. This leaves plenty of room for a host of other I/O options that you may need to suit your specific test applications. From international power options to virtually every data and RF interconnect, we have the option available that you require.
The STE3000F2 is designed around the same heavy duty, rugged .090″ and .125″ aluminum used throughout all of our enclosures. New for 2014 it also features our custom engineered GEN-2 RF gaskets. With over a year in the R&D lab, these new gaskets provide a previously unheard of and flawless RF seal while being immune to the fixed compression set of typical stainless gaskets. Likewise, also new for 2014 the STE3000F2 also features our GEN-2 RF absorbent and reflective foam lining. This foam was designed from the ground up, to our demanding specifications to provide maximum performance over all operating frequencies and bands.
Tamper-proof hardware and dual padlockable latches prohibit unauthorized access and maintains the chain of custody for the devices collected.
If your department is looking to join the countless others that have made the STE3000F2 the standard RF Test Enclosure in the forensics industry, give us a call. If you are interested an electronic documentation version of the STE3000F2, check out our STE3000FAV2. We provide the same visual and hands-on access, but add a high resolution video/audio recording system to record and time stamp your entire device interrogation. Just like today’s public safety dashcams, the evidence is in the video!
Pro konfiguraci komory STE2200F2 na základě vašich požadavků vám rádi připravíme cenovou nabídku!
Pro vyžádání nabídky klikněte zde.
Otázky k tomuto produktu?
Zavolejte nám na +420 315 55 88 70 nebo nás kontaktujte a my vám rádi pomůžeme.
RF Feedthrough Connectors (Female-Female)
BNC Dust Cover Photo
BNC Feedthrough Connector 50 Ohm Photo
BNC Feedthrough Connector 75 Ohm Photo
SMA Dust Cover Photo
SMA Feedthrough Connector Photo
SMB Jack to Jack Bulkhead Connector Photo
TNC Dust Cover Photo
TNC Feedthrough Connector Photo
Type N Dust Cover Photo
Type N Feedthrough Connector Photo
Type N to SMA Feedthrough Connector Photo
UHF Female Bulkhead Connector Photo
RF Filtered Data Connectors
DB 9 10 PF Connector (RF Filtered) Photo
Used for very high-speed data, <= 400 Mbps (required for USB 2.0)
DB 9 100 PF Connector (RF Filtered) Photo
Used for high-speed data, <= 150Mbps (Required for USB 1.x or 10/100 Ethernet)
DB 9 1000 PF Connector (RF Filtered) Photo
Used for RS-232
DB 9 Female to Female Gender Changer Photo
DB 9 Male to Male Gender Changer Photo
DB15 100 PF Connector (RF Filtered) Photo
Used for VGA Filtered Interface
DB15 1000 PF Connector (RF Filtered) Photo
Used for VGA filtered interface
DB25 100 PF Connector (RF Filtered) Photo
DB25 1000 PF Connector (RF Filtered) Photo
DB25 310 PF Connector (RF Filtered) Photo
DB37 1000 PF Connector (RF Filtered) Photo
DB37 310 PF Connector (RF Filtered) Photo
DB50 1000 PF Connector (RF Filtered) Photo
DB50 310 PF Connector (RF Filtered) Photo
Data Adapter Kits
DB9 – RJ11 / Female Photo
Connects to RF filtered DB9 (not included)
DB9 – RJ11 / Male Photo
Connects to RF filtered DB9 (not included)
Gigabit & PoE Ethernet Interface Photo
The ultimate I/O interface for both Ethernet and custom applications
IEEE 1394 (FireWire) Adapter Kit Photo
Connects to RF filtered DB9 10pF (not included)
RJ45 Adapter Kit Photo
Connects to RF Filtered DB9 100pF (not included)
RJ45 plugs into female DB9 on inside
RJ45 plugs into male DB9 on outside
Shielded USB 1.x or 2.0 Connector (Unfiltered) Photo
USB-A inside, USB-B Outside
Shielded USB 3.0 Connector (Unfiltered) Photo
USB A female outside, USB A male inside
Shielded USB Adapter Kit Photo
Fully 100% shielded USB adapter kit that connects to an RF filtered DB9 I/O connector
(not included) on your I/O panel.
includes:
USB-A to DB9M fully shielded adapter on inside of enclosure
USB-B to DB9F fully shielded adapter on outside of enclosure
Use 100pf DB9 I/O for USB1.x and 10pf DB9 for USB2.0 compatibility
USB 2.0 High Speed I/O Interface Photo
The ultimate high speed I/O interface for USB2.0
USB-A Adapter Kit Photo
Connects to RF Filtered DB9 (not included).
USB-A plugs into female DB9 on inside
USB-A plugs into female DB9 gender changer on outside (not included)
Use 100pF DB9 for USB1.x and 10pF DB9 for USB2.0.
USB-A Shielded Adapter Kit
Connects to RF Filtered DB9 (not included).
USB-A plugs into female DB9 on inside
USB-A plugs into female DB9 gender changer on outside (not included)
Use 100pF DB9 for USB1.x and 10pF DB9 for USB2.0.
VGA Monitor Interface Adapter Kit Photo
Connects to RF filtered DB15 100pF (not included)
Fiber Feedthrough Connectors ( Female – Female)
FC Bulkhead / Coupler
FC Simplex to FC Simplex Bulkhead
ST Multimode to ST Multimode Bulkhead Photo
RF Filtered AC / DC Terminal Blocks
4 Pole Filtered AC Terminal Block Photo
0 – 250 VAC, 20 Amp, Covers Included
4 Pole Filtered DC Terminal Block Photo
0 – 100 VDC, 20 Amp, Covers Included
6 Pole Filtered AC Terminal Block Photo
0 – 250 VAC, 20 Amp, Covers Included
6 Pole Filtered DC Terminal Block Photo
0 – 100 VDC, 20 Amp, Covers Included
STE Cooling Options
60mm 120 VAC Fan w/ Mounting Hardware Photo
Vent for STE 2000 & 3000 Series
Includes dual vent holes and 1 60mm (2.36″) 9.1 CFM 115 VAC Fan
Hardware Options and Accessories
12VDC / 12 LED Light Board Photo
12VDC Power Supply Photo
90/240VAC Auto Switching
AC Relay & Magnetic Switch
Turns off all AC within the box when lid or door is opened. Turns on again when lid is closed. 15 Amp Max.
Magnetic Sensor & Magnetic Flange Photo
RF Relay & Magnetic Switch
Inhibits RF when lid is opened. Call for details.
Steel Friction Hinge Photo
- navržený pro laboratorní práci forenzních expertů s hands-on přístupem k zařízení
- patentovaný design
- RF izolované dotykové rukavice
- RF izolovaný přisvětlený průhled přímo na zařízení
- 1/2″ GEN-2 vysoce kvalitní RF pěnová výplň
- GEN-2 vysoce kavlitní RF těsnění
- univerzální odnímatelný I/O panel
Konektory
- RF izolovaná 6-pozicová 110V lišta
- RF izolovaný 6-pólový průchozí terminal block
- RF izolovaný USB2.0 interface
- další konektroy na přání
Izolace
- >90dB @ 918MHz
- >85dB @ 2.4GHz
- >80dB @ 5.8GHz
Rozměry / Hmotnost
- Vnější: 12.8″H x 18.0″W x 12.0″D / 33 x 46 x 31 cm
- Vnitřní: 8.0″H x 17.0″W x 10.5″D / 20 x 43 x 26 cm
- Hmotnost: 25lbs. / 11.34kg.